Welco Titanium 20W40 CH-4

Description

WELCO TITANIUM SERIES with specially engineered Dura shield Boosters gives you up to twice the engine life compared to other oil. WELCO TITANIUM SERIES 20W40 gives you up to 400 Hours of Protection.

WELCO TITANIUM SERIES 20W40 is premium quality multigrade engine oil formulated for use in modern high-speed turbo charged or naturally aspirated all engines.

It comes under the service category of WELCO TITANIUM SERIES. It has been designed by using high performance additives and high-quality base stocks to impart necessary important properties to the lubricant to perform in heavy duty engines on highway or off highways.

It is blended from highly base stocks and with advanced additives, that offers best possible lubrication, assures excellent protection against high temperature engine deposits, oil degradation, oil thickening and corrosion resistance.

The main causes of damage in modern engines are abrasive wear, deposits and corrosion. WELCO TITANIUM SERIES with Dura shield Boosters actively fights the main causes of engine damage to deliver superior protection by:

  • Preventing the agglomeration of soot as well removing harmful soot particles from metal surfaces.
  • Providing a protective film around moving metal surfaces which resists break down even under difficult conditions, maintain the film layer.
  • Delivering improved deposit and corrosion protection by resisting thermal breakdown of oil, and by neutralizing harmful acids.
  • Suitable for BS VI compliant bikes
  • High oxidation stability
  • Maximum cleanliness
  • Improved fuel economy
  • Reduced oil consumption
  • Excellent anti-wear technology
  • Outstanding engine cleanliness
  • Superior thermo-oxidative stability
  • Reduced engine maintenance costs
  • Compatible with catalytic converter
  • Good oxidation and thermal stability
  • High fluidity at very low temperature
  • Outstanding rust and corrosion protection
  • Maintain a high order of engine cleanliness
  • Stable film strength for boundary lubrication
  • Boost engine life and reduce maintenance cost
  • Excellent engine cleanliness and wear protection
  • Improved wear protection & extended engine life
  • Excellent lubrication over a wide temperature range
  • Outstanding detergency – dispersion to minimize carbon, varnish, lacquer and sludge
  • The high neutralizing capacity avoids the need to reduce the amount of sulphur in the fuel of engine oil temperature.
  • MEETS API CH-4 & CI-4
  • MEETS JASO MA 2

WELCO TITANIUM SERIES grades are recommended for new BS VI compliant geared premium multigrade Petrol, Diesel & CNG Engine Oil. WELCO TITANIUM SERIES 20W40 is recommended by WELCO for use in all naturally aspirated engines fitted in passenger car, trucks, tractors, buses, goods carrier (LCVs), off highway equipment, 3-wheelers, pump set, genset and other vehicles.

210 LTR, 55 LTR, 50 LTR, 26 LTR, 20 LTR, 10 LTR, 8.5 LTR, 8 LTR, 7.5 LTR, 7 LTR, 5 LTR, 3.5 LTR, 3 LTR, 1 LTR

Prolonged and repeated contact with oil may cause skin disorders. Avoid contact. Wash immediately with soap and water. Do not discharge used oil in to drains or the environment. Dispose to an authorized used oil collection point. For further Information on Safety Guidelines please refer to MSDS available on our website www.welcolubricants.com.

Features and Benefits
  • Suitable for BS VI compliant bikes
  • High oxidation stability
  • Maximum cleanliness
  • Improved fuel economy
  • Reduced oil consumption
  • Excellent anti-wear technology
  • Outstanding engine cleanliness
  • Superior thermo-oxidative stability
  • Reduced engine maintenance costs
  • Compatible with catalytic converter
  • Good oxidation and thermal stability
  • High fluidity at very low temperature
  • Outstanding rust and corrosion protection
  • Maintain a high order of engine cleanliness
  • Stable film strength for boundary lubrication
  • Boost engine life and reduce maintenance cost
  • Excellent engine cleanliness and wear protection
  • Improved wear protection & extended engine life
  • Excellent lubrication over a wide temperature range
  • Outstanding detergency – dispersion to minimize carbon, varnish, lacquer and sludge
  • The high neutralizing capacity avoids the need to reduce the amount of sulphur in the fuel of engine oil temperature.
Performance Levels
  • MEETS API CH-4 & CI-4
  • MEETS JASO MA 2
Application

WELCO TITANIUM SERIES grades are recommended for new BS VI compliant geared premium multigrade Petrol, Diesel & CNG Engine Oil. WELCO TITANIUM SERIES 20W40 is recommended by WELCO for use in all naturally aspirated engines fitted in passenger car, trucks, tractors, buses, goods carrier (LCVs), off highway equipment, 3-wheelers, pump set, genset and other vehicles.

Packaging Details

210 LTR, 55 LTR, 50 LTR, 26 LTR, 20 LTR, 10 LTR, 8.5 LTR, 8 LTR, 7.5 LTR, 7 LTR, 5 LTR, 3.5 LTR, 3 LTR, 1 LTR

Health & Safety, Environment

Prolonged and repeated contact with oil may cause skin disorders. Avoid contact. Wash immediately with soap and water. Do not discharge used oil in to drains or the environment. Dispose to an authorized used oil collection point. For further Information on Safety Guidelines please refer to MSDS available on our website www.welcolubricants.com.

keyboard_arrow_up
Quick Inquiry
close slider