WELCO CALIBER AW is blended from deep hydro finished base stocks and select additives. The additives are designed for optimum compressor operation. The additives are used to enhance the oxidation stability, anti-rust characteristics, anti-wear properties of the oil. The oil has natural demulsification property, low foaming tendency and quick air release property.

WELCO CALIBER AW oils are blended from highly base stock and carefully selected anti-oxidant, anti-wear, anti-rust and anti-foam additives, to get best possible lubrication characteristics.

WELCO CALIBER AW is a range of superior quality anti – wear type hydraulic oils blended from high quality base stocks and selected additives formulated primarily as heavy-duty anti wear hydraulic oils with excellent water separating characteristics.

Every industrial lubricant recommendation should be done after an expert consultation on the application in question. Only then the best lubricant can be selected. Oscar hydraulic oils series WELCO CALIBER AW are fitted to all your industrial applications WELCO CALIBER AW series are general lubricating and hydraulic oils with good ageing resistance and additives to improve corrosion protection. Good viscosity temperature behaviour, good wear protection, demulsifying, good air release, contain zinc.

The ownership and operating costs of heavy vehicles are high. However, the daily cost of lubricants only accounts for 1-2% of the total cost, which is why these costs are sometimes ignored when considering the total cost of ownership.

Many operators view lubricants as a simple commodity in which they can save costs.

In fact, our hydraulic ISO VG 68 heavy-duty oil products provide additional performance reserves, which can resist oil breakdown by controlling oxidation, reducing deposits and neutralizing harmful acids. This means a longer service life and can reduce your operating costs.

No matter what type of heavy vehicle you use, WELCO CALIBER AW has the expertise, products and services you need to ensure operational efficiency and reduce total cost of ownership.

In order to meet the challenges of various industrial equipment and applications, WELCO CALIBER AW has developed a complete range of hydraulic oils, enabling you to choose the product that best meets your industrial needs.

The formula WELCO CALIBER AW can extend the life of the industrial equipment. WELCO CALIBER AW has excellent rust resistance, water separation ability, high membrane strength and excellent operability under extreme pressure.

WELCO CALIBER AW ensures smooth power transmission and protects metal surfaces from corrosion and oxidation. WELCO CALIBER AW is designed keeping in mind all hydraulic systems where multigrade hydraulic oil is recommended.

WELCO CALIBER AW grades are fire resistant hydraulic fluids based on organic ester. These fluids can replace phosphate esters in high temperature applications and are recommended as control governor fluids for steam and gas turbine. They do not have any seal compatibility issues which are inherent in phosphate ester fluids. The same seals used with mineral oils can be used with WELCO CALIBER AW. These fluids not only provide improved safety as compared to mineral oil but offer superior lubricity and antiwear properties as compared to invert emulsion (FRIE) fluids and also mineral oil based hydraulic fluids. While changing over from invert emulsion to FRDU based fluids care must be taken that there is no residual fluid or moisture present in the system. If necessary, the line may be flushed with mineral oil to ensure that no traces of invert emulsion fluid remain in the system. The product is also bio degradable.